HomeUp

Cable Guide

The Cable Guide is a must-have for KTMís and Husabergís using standard, bar-mount steering stabilizer systems.  The guide keeps the cables and hoses away from the stabilizer, stabilizer adjustment knobs, handlebar clamp and handlebars preventing wear and cable snags that could lead to an expensive, inconvenient or dangerous failure.

 

The Cable Guides are machined from billet 6061 Aluminum.  They can be purchased with a machined surface or anodized orange or black.  All mounting hardware is 18-8 stainless steel to prevent corrosion.  Installation time is less than five minutes using the included hex wrench.

 

The Cable Guide was designed, built and tested by off-road riders and racers just like you.  Please contact us if you have any questions or comments.

 

CHECK OUT THE SUBMOUNT CABLE GUIDE FURTHER DOWN THE PAGE.

 

 

    

 

 

2009 KTM 450XCW

2008 KTM 300XCW

                                    

 

2006 KTM 450XC

2006 KTM 525EXC

 

 

2006 Husaberg FE550

2009 Beta RS

 

 

 

CSE Scotts Submount Cable Guide

Like the original Cable Guide, the new submount Cable Guide is a must-have for KTMís and Husabergís using Scotts submount, steering stabilizer systems.  The guide keeps the cables and hoses away from the stabilizer, handlebar clamp and handlebars preventing wear and cable snags that could eventually lead to an expensive, inconvenient or dangerous failure.

 

The Submount Cable Guides are machined from a wear resistant, tough copolymer plastic.  All mounting hardware is stainless steel to prevent corrosion.  Installation time is less than five minutes.

 

The Cable Guide was designed, built and tested by off-road riders and racers just like you.  Please contact us if you have any questions or comments.

 

 

2008 KTM 450XCW

2011 KTM 300XC

 

2012 KTM 350XCF

 

 


 

Cable Guide Ordering

 

Part Number Color/Type Post Diameter Price Ea. Status Order
1011-0001 Plain Aluminum 1/2"(12.7mm) $29.95 In stock

1011-0006 Plain Aluminum 9/16"(14.3mm) $29.95 In stock

1011-0009 Plain Aluminum, GPR 1/2"(12.7mm) $32.95 In stock

1012-0003 Submount - Universal NA $21.95 In stock

 

                                                                                                                                                                                             

 

 

 

Official PayPal Seal

-On line payments securely processed with PayPal.

-If you don't have a Paypal account, follow the link and it will instruct you on how to use a credit card.

-Check our Information page for shipping and return info.

-If you are not sure of the post diameter follow the directions in the CSE Cable Guide instructions linked below.

-The submount cable guide is currently designed to work with Scotts submount systems.  If you have a GPR V1 submount system the standard Cable Guide will work.

-The standard Cable Guide may not completely eliminate all interference if the damper is mounted on top, but backwards (180 degrees from standard, main shaft away from rider). In these cases we recommend using the submount Cable Guide.

-Clean Speed Engineering (CSE) LLC is not responsible for any issues resulting from the use of our products.

-Part number 1012-0003, Submount - Universal, is designed to work with all bikes two stroke and four stroke, using a Scotts damper in a submount position with the throttle cable running behind the handlebars.

 

Cable Guide Instructions

 

Post Diameter Measurement

 

Get Adobe Reader

 


 

Contact Information

Electronic mail

General Information: jim@cleanspeedeng.com